The Iron Album

Systems
Processing units
CPU
NPU
Motherboards
Memory
Expansion cards
Audio
Video
Storage
Network
Misc I/O
Storage devices
NVM
SSD
HDD
Optical
Tape
Removable
PSU
Comms
Hubs & switches
Routers
Modems
Transceivers
Wi-Fi
Peripherals
Keyboard
Mouse
Cases & enclosures
Vendor Model Host bus Interface Attachment
HP J2585A PCI 32/33, 5V Ethernet TP RJ45: 10Base-T
100VG-AnyLAN TP RJ45: 100VG-AnyLAN

Linux

dmesg

hp100: eth1: PCI Master Bit has not been set. Setting...
hp100: eth1: PCI adapter found at 0xe400
hp100: eth1: Rainier Chip detected. (This is a pre 802.12 chip)
hp100: eth1: original LSW = 0x2262
hp100: eth1: Card not configured for BM or BM not supported with this card.
hp100: eth1: Trying shared memory mode.
hp100: eth1: new LSW = 0x2262
hp100: eth1: remapped 0x20000 bytes high PCI memory at 0xf9ffe000 to c2808000.
hp100: eth1: TX_MEM_STOP: 0x1fff
hp100: eth1: RX_MEM_STOP: 0x1800
hp100: eth1: sense_lan: val_VG = 0x0099, val_10 = 0x0084
hp100: eth1: HP J2585A at 0xe400, IRQ 11, PCI bus, 128k SRAM (rx/tx 75%).
hp100: eth1: Memory area at 0xf9ffe000-0xfa01dfff (virtual base c2808000).
hp100: eth1: Adapter is attached to 10Mb/s network.

hp100: eth1: PCI Master Bit has not been set. Setting...
hp100: eth1: PCI adapter found at 0xdc00
hp100: eth1: Rainier Chip detected. (This is a pre 802.12 chip)
hp100: eth1: original LSW = 0xa26c
hp100: eth1: Card not configured for BM or BM not supported with this card.
hp100: eth1: Trying shared memory mode.
hp100: eth1: new LSW = 0xa26c
hp100: eth1: remapped 0x20000 bytes high PCI memory at 0xefffe000 to ce839000.
hp100: eth1: TX_MEM_STOP: 0x1fff
hp100: eth1: RX_MEM_STOP: 0x1800
hp100: eth1: sense_lan: val_VG = 0x00ab, val_10 = 0x0080
hp100: eth1: HP J2585A at 0xdc00, IRQ 10, PCI bus, 128k SRAM (rx/tx 75%).
hp100: eth1: Memory area at 0xefffe000-0xf001dfff (virtual base ce839000).
hp100: eth1: Adapter is attached to 100Mb/s Voice Grade AnyLAN network.

lspci

00:06.0 Ethernet controller: Hewlett-Packard Company J2585A DeskDirect 10/100VG NIC
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at e400 [size=256]
	Region 1: Memory at f9ffe000 (32-bit, non-prefetchable) [size=8K]

00:06.0 Class 0200: 103c:1030
00: 3c 10 30 10 03 00 80 02 00 00 00 02 00 00 00 00
10: 01 e4 00 00 00 e0 ff f9 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00