DEC
| DE500-BA
| DEC 21143-PC
| PCI 32/33
| Fast Ethernet
| TP RJ45: 10Base-T, 100Base-TX
|
Linux 2.4.22
dmesg
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
eth1: Digital DS21143 Tulip rev 48 at 0xc1810000, 00:00:F8:1B:2D:27, IRQ 11.
mii-tool
eth1: no link
product info: vendor 00:00:00, model 0 rev 0
basic mode: autonegotiation enabled
basic status: no link
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
lspci
00:0d.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 30)
Subsystem: Digital Equipment Corporation DE500B Fast Ethernet
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (5000ns min, 10000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at f000 [size=128]
Region 1: Memory at fffbc000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at fd000000 [disabled] [size=256K]
00:0d.0 Class 0200: 1011:0019 (rev 30)
00: 11 10 19 00 07 00 80 02 30 00 00 02 08 f8 00 00
10: 01 f0 00 00 00 c0 fb ff 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 10 0b 50
30: 00 00 00 fd 00 00 00 00 00 00 00 00 0b 01 14 28
|