|
Intel
| PILA8460B
| Intel PRO/100+ PCI Management Adapter
| 721383-008
| EJMNPDALBANY
| PCI 32/33
| Fast Ethernet
| TP RJ45: 10Base-T, 100Base-TX
|
Linux 2.4.26
dmesg (e100)
Intel(R) PRO/100 Network Driver - version 2.3.38-k1
Copyright (c) 2004 Intel Corporation
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
cpu cycle saver enabled
e100: eth0 NIC Link is Up 100 Mbps Full duplex
mii-tool
eth0: negotiated 100baseTx-FD flow-control, link ok
product info: Intel 82555 rev 4
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
lspci
02:0b.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
Subsystem: Intel Corp. EtherExpress PRO/100+ Management Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 32 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at bd800000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b400 [size=64]
Region 2: Memory at bd000000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
02:0b.0 Class 0200: 8086:1229 (rev 08)
00: 86 80 29 12 17 00 90 82 08 00 00 02 08 20 00 00
10: 00 00 80 bd 01 b4 00 00 00 00 00 bd 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 0c 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 09 01 08 38
|